Konica Minolta bizhub C35 - Manual (Page 73)

Receiving G3 faxes 4-4
DRPD
Select this mode when using DRPD (Distinctive Ring Pattern Detection).
If the receiver rings with the pattern selected from the four ring patterns avail-
able, the incoming call is automatically received as a fax.
In order to use DRPD, the following settings in the [Fax Settings] screen
([Admin Settings]) must be specified.
„ Set [Comm. Settings] - [RX Mode] to [DRPD].
„ With [Comm. Settings] - [Ring Pattern], select the ring pattern for faxing.
"
For details on the settings, refer to “[Comm. Settings]” on page 2-10.
[Ring Pattern]
Refer to the following table and select the ring pattern.
S-ON (Short-ON): On for 150 ms to 600 ms
L-ON (Long-ON): On for more than 600 ms
S-OFF (Short-OFF): Off for 100 ms to 1,200 ms
L-OFF (Long-OFF): Off for more than 1,200 ms
Settings Ring Pattern
[Normal Ring] L-ON + L-OFF
[Double] L-ON + S-OFF + L-ON + L-OFF
[Triple 1] S-ON + S-OFF + L-ON + S-OFF + S-ON + L-OFF
[Triple 2] S-ON + S-OFF + S-ON + S-OFF + L-ON + L-OFF