Konica Minolta Magicolor 2480MF - Manual (Page 78)

Making Basic Copies 66
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
Basic Copy Operation
1
Position the document to be
copied.
"
For details on positioning
the document, refer to
“Placing a Document on
the Original Glass” on
page 51 and “Loading a
Document into the ADF”
on page 52.
2
Specify the desired copy settings.
"
For details on specifying the zoom ratio, refer to “Specifying the
Zoom Ratio” on page 67.
For details on selecting the copy density, refer to “Selecting the
Copy Density” on page 67.
For details on selecting the media tray, refer to “Selecting the
Media Tray” on page 68.
For details on setting 2in1 copying, refer to “Setting 2in1 Copying”
on page 69.
For details on setting duplex (2-sided) copying, refer to “Setting
Duplex (2-Sided) Copying” on page 69.
For details on setting collated copying, refer to “Setting Collated
Copying” on page 71.
3
Using the keypad, specify the desired number of copies.
"
If the number of copies was incorrectly entered, press the Cancel/
C key, and then specify the correct number of copies.