Replacing the transfer belt unit, Replacing the transfer belt unit 109 – Konica Minolta Magicolor 5450 User Manual
Page 123
Advertising
Replacing Consumables
109
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE
appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Open the printer’s front cover.
2
Turn the dial to unlock the
waster toner bottle.
3
Pull out the waste toner bottle
and the toner cartridges for
about 10 cm (4").
Lock
Unlock
Advertising