APM ABR-2510 - Manual

1 of 1
APM CO., LTD
ABR-2502 ABR-2510
(Outdoor)
Standards compliance IEEE 802.11b
Frequency band 2512 to 2584 MHz
Transmission power 200mW, 1W
Receiver sensitivity* 11 Mbps: 8% PER, -82 dBm (typical)
Antenna type External high gain antenna
Outdoor 200mW Input voltage DC 12V 2A; external power supply
included (input voltage 100V to 240V AC)
Outdoor 1W Input voltage DC 15V 3A; external power supply
included (input voltage 100V to 240V AC)
Data rates 1, 2, 5.5, and 11 Mbps with auto fallback
RF spreading scheme Direct-sequence spread-spectrum (DSSS)
Encoding and modulation BPSK, QPSK, and CCK
Security 64-bit / 128-bit Wired Equivalent Privacy (WEP) encryption; MAC
Access Control; Administrative Access Control
Kick Start
Web-based Tool
Bridge Auto Learning
Network Management System Windows 95/98/ME/NT4.0/2000/XP
Environmental requirements Operating temperature: -30° to +70° C
Software Support
Specifications
* Minimum receiver input power level at which a packet error ratio (PER) of less than the indicated
percentage can be maintained, given a packet length of 1024 bytes and conditions of 20° to 30° C.
2.5GHz Wireless Bridge Solution
Input Power
ABR-2502 ABR-2510
1F, No.49, Alley 24, Lane 75, Sec 3, Kang-Ning Rd, Nei-Hu Dist, Taipei 114, Taiwan, R.O.C.
www.apm.com.tw [email protected] Tel: +886 2 26335543 Fax: +886 2 26330472