Tcp/ip, Tcp/ip -37, Configuring the printer 5-37 network page – Konica Minolta magicolor 3730DN User Manual
Page 174
Configuring the Printer
5-37
Network Page
This page allows you to configure network settings. For more information on
these protocols, see Chapter 4 “Network Printing”
TCP/IP
TCP/IP (shown above)
The Network - TCP/IP - TCP/IP window allows you to configure the following
items. For more information on these TCP/IP, see Chapter 4 “Network Print-
ing”
Item
Description
Speed
Specifies the operating mode and speed for Ethernet.
Choices: Auto, 10Base-T(Half), 10Base-T(Full),
100Base-TX(Half), 100Base-TX(Full)
Default: Auto
Configuration Menu Equivalent:
NETWORK - FORCED MODES -
SPEED/DUP/NEG.
LPD
Select whether or not LPD is used.
Choices: Enable, Disable
Default: Enable
Apply button
Applies the configuration settings for this window.
Clear button
Resets all configuration settings to previous values.