Limitations and workarounds, Media loading, Stapling landscape jobs – Xerox DocuColor 242-252-260 con EFI Fiery EXP260-14691 User Manual
Page 4
Page 4
Limitations and
workarounds
Media loading
The Fiery EX260 does not receive information about the orientation of paper loaded in the
copier. The server submits data on the media size and weight, but not the feed direction.
For this reason, certain conflicts may arise. For example, the Staple-Portrait-Top/Landscape-
Right and Staple-Portrait-Bottom/Landscape-Left settings require SEF (short edge feed).
When these jobs arrive at the Fiery EX260 with only Letter size LEF (long edge feed) loaded
in the copier, the job has a status of Printing, but displays an error in the Active Jobs window
requesting the user to load paper. After you load Letter SEF, the job prints as requested.
This limitation applies to other Finishing options (hole punching) and certain Booklet Maker
settings. For information about resolving these issues, see individual instances in the following
sections.
Stapling landscape jobs
Staples for Landscape jobs staple in the opposite corner that you specify when you print to the
copier from a Fiery EX260 IPP print path as follows:
• 1 Staple - Top Right Landscape prints out as 1 Staple - Top Left Landscape
• 1 Staple - Top Left Landscape prints out as 1 Staple - Top Right Landscape
To avoid this, from FreeFlow, select:
• 1 Staple - Top Right Landscape to staple the top left corner of the landscape page
or select:
• 1 Staple - Top Left Landscape to staple the top right corner of the landscape page
To staple landscape jobs of all paper sizes correctly from FreeFlow applications, refer to the
following table.
Or you can send the job to the Fiery EX260 Hold queue and override the staple setting at the
copier using Command Workstation.
FreeFlow Print Manager
Staple options
Command WorkStation
Staple options
Portrait Job
Landscape Job with
Orientation set to OFF
(Orientation is set to
OFF for all jobs sent from
FreeFlow Print Manager)
Landscape Job with
Orientation set to
Landscape
(Select Landscape for
Orientation from
Command WorkStation
Job Properties)
1 Staple - Top Left Portrait
Left Top Single
Top Left
Left Top
Top Left
1 Staple - Bottom Left Portrait Left Bottom Single
Bottom Left
Top Right
Bottom Left
1 Staple - Top Right Portrait
Right Top Single
Top Right
Bottom Left
Top Right
1 Staple - Bottom Right
Portrait
Right Bottom Single
Bottom Right
Bottom Right
Bottom Right
2 Staples - Left Portrait
Left Double
Does not Staple -
Top Tray
Does not Staple - Top
Tray
2 Staples Left