Xerox 4112-4127 Enterprise Printing System-3364 - Manual (Page 6)

Safety and Notices Xerox 4112/4127
2 Xerox 4112/4127 Safety Guide
If any of the following conditions occur, immediately switch off the power to the machine and
disconnect the power cord from the electrical outlet. Call an authorized Xerox service
representative to correct the problem.
• The machine emits unusual noises or odors.
• The power cord is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device is tripped.
• Liquid is spilled into the press.
• The machine is exposed to water.
• Any part of the machine is damaged.
Disconnect device
The power cord is the disconnect device for this equipment and is attached to the back of the
machine as a plug-in device. To remove all electrical power from the machine, disconnect the
power cord from the electrical outlet.
Laser safety
North America
This equipment complies with international safety standards and is classified as a Class 1 Laser
Product.
With specific reference to lasers, the equipment complies with laser product performance
standards set by governmental, national, and international agencies as a Class 1 Laser Product.
It does not emit hazardous light, as the beam is totally enclosed during all phases of customer
operation and maintenance.
WARNING
This product must be connected to a protective earth current.
CAUTION
Use of controls, adjustments, or performance of procedures other than those specified in this
guide may result in hazardous light exposure.