Notifications – Adcon A720 User Manual
Page 53
CHAPTER 4
Notifications
53
unit it is communicating with. After detecting that the device
supports this protocol, the
INFO command must be used for
further details.
Notifications
Notifications are frames sent asynchronously by devices that are
otherwise slaves. The notifications are received by a device closest
to the host and then sent to the host. If the host is not available,
the receiving device will store the notification and wait until it is
questioned by the host. At this point, it will inform the host that it
has a notification. It is then the task of the host to issue a command
to read the respective notification.
Before a device can issue a notification, the notification must first
be enabled. Special frames are used to this end, depending on the
notification type. If an end device is not able to send a notification
due to radio propagation or other kind of communication prob-
lems, it will store the date/time when the notification took place.
As soon as the communication is re-established, the device will try
to send the notification again.
Note: To avoid collisions, the device will wait a random time (up to
10 seconds) before sending the notification frame.
When the device closest to the host receives a notification from a
remote, it must inform the host about it by sending a break charac-
ter on the serial line. The host must then issue the command
DEV
in order to see which device has a notification pending (see also
“
DEV” on page 35). If the host is not available, the device closest
to the host will wait until first time requested by the host and after
answering to the host request will re-send a break. This sequence
will go on as described until the host issues the
DEV command.
The following notification is currently defined for the A720 device:
•
NOPC—Notification On Port Change (see “PORT” on
page 46).
In addition to this notification, the A723 devices can issue the fol-
lowing:
•
NOTR—Notification On Threshold Reached (see “ANLG” on
page 43)
The A720B device does not currently recognize notifications.