AMX Modero NXD/NXT-1200VG - Manual (Page 103)

Configuring Communication
89 VG-Series Modero Touch Panels
 The previous version of the AMX USBLAN driver showed a USB connection icon in the system
tray when a panel was connected. The new version of the driver does not show an icon in the
System Tray.
10. Navigate back to the System Settings page.
Step 3: Confirm and View the current AMX USB device connections
1. Navigate to Start > Settings >Control Panel > and double-click the System icon to launch the System
Properties dialog.
2. Select the Hardware tab and click on the Device Manager button to launch the Device Manager dialog.
 Within the Device Manager dialog, the AMX USBLAN device appears under Network Adapters
(FIG. 75) and has a unique name such as AMX USB LAN LINK #2. The number changes
depending on which recognized panel is currently connected.
FIG. 74 USB driver installation popup window
A Virtual NetLinx Master (VNM) is used when the target panel is not connected to a
physical NetLinx Master. In this situation, the PC takes on the functions of a Master
via a Virtual NetLinx Master. This connection is made by either using the PC’s
Ethernet Address (via TCP/IP using a known PC’s IP Address as the Master) or
using a direct mini-USB connection to communicate directly to the panel.
FIG. 75 Device Manager dialog showing USB device
USB connected touch
panel (showing the
recognized panel)