AMX Modero NXD/NXT-1200VG - Manual (Page 136)

Firmware Pages and Descriptions
122 VG-Series Modero Touch Panels
Setup Page
This page (FIG. 103) centers around basic Modero panel properties such as: Connection Status of the
panel, Display Timeout, Inactivity Page Flip Time, Inactivity page file, and the Panel Brightness.
The elements of the Setup page are described in the table below:
Setup Navigation Button Elements (Cont.)
Audio: Press the Audio button to access the Audio Settings page, where you can alter
the audio parameters on the Modero panel.
• Refer to the Audio Settings Page section on page 128 for more detailed
information.
Video: Press the Video button to access the Video Settings page, where you can set
the video properties for incoming video.
• This button only appears on Color Video (CV) capable touch panels.
• Refer to the Video Settings Page section on page 130 for more detailed
information.
Battery Base: Press the Battery Base button to access the Battery Base page, where you
can modify and monitor NXT-BP Modero Power Pack parameters.
• This button only appears when a Modero Table Top panel (NXT) is connected
to an NXA-BASE/B battery base.
• Refer to the Battery Base Page section on page 140 for more detailed
information.
FIG. 103 Setup page
Setup Page Elements
Exit: Returns you to the Main touch panel page. In this case, the previous page is the
default Main page.
Connection Status icon: This visual display of the connection status allows the user to have a current
update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Video button doesn’t
appear on Non-Video (CA) panels
Battery Base button doesn’t appear
until NXT is connected to a BASE/B
Connection Status
Red Connection Status icon -
Green Connection Status icon -
indicates no connection to a Master
indicates communication to a Master