Blodgett VIB3240-1 User Manual

Single, double, triple in-vent, Hood system

Advertising
background image

BLODGETT OVEN COMPANY

www.blodgettcorp.com

50 Lakeside Avenue, Burlington, VT 05402

Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

Project

Item No.

Quantity

In-Vent

®

conveyor oven ventilation hood system.

All data is shown per oven section, unless otherwise indicated.

EXTERIOR CONSTRUCTION

!

Stainless steel exterior on front, sides, and ducts

!

Integral exhaust and make-up air plenum and duct collar assembly

!

Quick release duct fittings and duct extensions

!

Front air make-up cooling panels

!

Cooling fan motor exhaust plenum

!

Conveyor entrance/exit end exhaust plenums

!

Heat shields over end exhaust plenums and vertical exhaust corner riser

!

Stainless steel ceiling trim pieces included

INTERIOR CONSTRUCTION

!

Aluminized steel, 300 and/or 400 series stainless steel

!

Insulated supply ducting

OPERATION

!

Captures smoke, contaminants and cooking by-products emanating from

the oven.

!

Minimizes amount of tempered air removed from kitchen by surrounding

itself and oven with a layer of untempered make-up air.

!

Requires much less exhaust and make-up air flow than conventional

overhead hoods.

!

Exhausts grease and smoke from directly over conveyors resulting in

cleaner oven and environment.

!

Cooler surfaces lower radiant heat to room and increase operator safety

and comfort significantly

STANDARD FEATURES

!

Available in three configurations (all ovens must have remote mounted

controls)
"

VIB3240-1 for single SG3240

"

VIB3240-2 for double stacked SG3240

"

VIB3240-3 for triple stacked SG3240

!

Fully detachable panels without tools

!

Quick disconnect ducting for servicing or cleaning

!

Adds only 6" to front-to-back dimensions

!

Ventilation system controls can be interlocked with the oven’s remote

mounted controls

!

Modular design for easier handling and cleaning

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)
"

Installation

VIB3240-1, VIB3240-2,

VIB3240-3

Single, Double, Triple

In-Vent

®

Hood System

In-V

ent® Model VIB3240-1, VIB3240-2, VIB3240-3

for Blodgett Conveyor Oven

SG3240

with remote mount controls

VIB3240-2 In-Vent

®

is shown on

Double Stacked Blodgett Model SG3240 Conveyor Oven

which is sold separately.

Advertising
This manual is related to the following products: