Recording – Olympus DM-901 User Manual

Page 29

Advertising
background image

2

Recording

29

EN

Recording

Sound files recorded with the voice
recorder are automatically given a file
name in the format below.

131001_ 0001 .WMA

1

2

3

1 Date recorded
Indicates the year, month and day the

recording was made.

2 File number
Appended file numbers are

consecutive regardless of whether the
recording media has been switched.

3 Extension
A file extension indicating the

recording format the file was recorded
in by the voice recorder.

Linear PCM format: “.WAV
MP3 format: “.MP3
WMA format: “.WMA

TIP

[Rec Mode] must be set with the voice

recorder stopped (☞ P.59).

Pressing the REC (

s) button while

[Recorder] is selected on the [Home]
screen will allow you to start recording.
The recorded file will be saved to
[Folder A].

You can adjust the recording level

manually to match your application
(☞ P.58).

NOTE

To prevent the beginning of the

recording being cut off, start recording
after the LED indicator light has lit or
mode indicator has appeared in the
display.

When the remaining possible recording

time is 60 seconds, the LED indicator
light starts flashing. It flashes more
rapidly as the remaining time decreases
(at the 30- and 10-second points).

When [Folder full] appears, no more

recording can be done. To record more,
you will need to select a different folder
or delete unneeded files (☞ P.46).

If [Memory full] appears, the voice

recorder has no more available
memory space. You will need to
delete unneeded files to record more
(☞ P.46).

When using an SD card in the voice

recorder, be sure the desired recording
media setting ([Internal memory]
or [SD card]) has been selected
(☞ P.71).

If a folder other than folders

& to * is

selected when the REC (

s) button is

pressed, the blinking message [Cannot
record in this folder
] appears. Redo
the recording operation after selecting
one of folders

& to *.

It’s recommended to initialize the

recording media before making an
important recording.

Processing performance may

be reduced when data has been
repeatedly written to or deleted from
the recording media. Please initialize
the recording media in this case
(☞ P.88).

Advertising