Olympus DM-901 - Manual (Page 75)

5
De
vice menu [De
vice Menu]
75
EN
Device menu [Device Menu]
When [Change password] is selected:
1 Press the 2 or 3 button to select
[Start].
2 Press the `OK button.
• When [Password changed] is
displayed, the procedure is completed.
Connecting a device to the voice recorder
1 Turn ON the Wi-Fi ON/OFF switch
of the voice recorder.
2 Operate the voice recorder to
display the SSID and password
on the screen.
3 Change the configuration of the
device to be connected.
When configuring a smartphone:
Use the QR* code or SSID and
password displayed using the [Wi-Fi
connection] function to configure
the smartphone. For details, see
the instruction manual for your
smartphone.
* To use QR codes, you must install a
special application beforehand.
TIP
• A special application is provided for
smartphones. If the special application
is installed on your smartphone, you
can easily use QR codes to configure
the phone (☞ P.93).
NOTE
• While the Wi-Fi ON/OFF switch is turned
ON, the [Power Save] function is disabled.
If the voice recorder is left in this state,
battery life will be consumed quickly.
• While the Wi-Fi ON/OFF switch is turned
ON, [Change password] is not available.
To perform [Change password], turn OFF
the Wi-Fi ON/OFF switch.
• When Wi-Fi is connected, battery
life is shorter. If the battery runs out
during data transfer, the data may be
damaged. Therefore, when using a
Wi-Fi connection we recommend that
you use the AC adapter included with
the voice recorder.
• Operation of the Wi-Fi ON/OFF switch
is disabled during recording. Perform
switch operations while recording is
stopped.