Brother HL-5140 - Manual (Page 24)

22
■
Other Information
If for any reason you must ship your printer, carefully package the printer in the original
packaging to avoid any damage during transit. It is strongly recommended that you save and
use the original packaging. The printer should also be adequately insured with the carrier.
When shipping the printer, the DRUM UNIT assembly and TONER CARTRIDGE must be
removed from the printer and placed in a plastic bag. Failure to remove the unit and
place it in a plastic bag during shipping will cause severe damage to the printer and may
VOID THE WARRANTY.
1
Turn off the printer power switch, and then
unplug the AC power cord.
2
Remove the drum unit assembly.
Place it in a plastic bag and seal the bag
completely.
3
Re-pack the printer.
Shipment of the Printer
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Windows
®
and Windows NT
®
are registered trademarks of Microsoft Corporation in the U.S and other countries.
Apple Macintosh
®
, iMac
®
, LaserWriter
®
, and AppleTalk
®
are trademarks of Apple Computer, Inc.
Adobe PostScript
®
and PostScript
®
3
TM
are trademarks of Adobe Systems Incorporated.
E NERGY S TAR is a U.S. registered mark.
All other brand and product names mentioned in this User's Guide are registered.
Compilation and Publication
This manual has been compiled and published, under the supervision of Brother Industries Ltd., covering the latest product
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.
This product is designed for use in a professional environment.