Pioneer AVIC-HD3-II - Manual

AVIC-HD3 II
Hardware buttons
1
Press the button
and then touch Address
Search .
2
Touch and then select
a country.
3
Input the street name.
4
Select the street name
from the list.
After narrowing down your
destination, the house
number input screen will
appear.
5
Input the house number
and touch OK .
The route calculation is car-
ried out and the route confir-
mation screen appears.
You can get another route with
Multiple Route . You may then
choose your preferred route.
6
Touch OK to select your
route. Navigation starts.
7
Begin driving in accordance
with navigation guidance.
This navigation system gives
you route guidance both visually
and by voice.
Search function overview
This navigation system has multiple methods for entering your des-
tination.
Press the
button to display the navigation menu.
1 Search by address
2 Calculate a route to the home address
3 Calculate a route to your favourite destination
4 Search for POIs in the database
5 Select a registered destination from the address book
6 Select a previously routed destination
7 Search for a destination by postal code
8 Search for POIs in your vicinity
Search result list for POI search
Sorts the POIs in the order
of distance.
POI (Points of Interests) are restaurants, hotels, petrol stations
and other categories in your navigation system.
1 OPEN CLOSE button
Press to access the disc loading
slot. Press and hold to set the
tilt of the LCD panel.
2
V button
Press to enter PICTURE
ADJUSTMENT mode.
3
VOL (2/8) button
You can adjust the volume of
the audio source.
4
AV button
Press to switch the screen to
the audio operation screen. If
you press the AV button again,
the audio source switches.
5
MENU button
Press to display a navigation
menu.
Press and hold to display
“ Phone Menu ” when a Pioneer
Bluetooth unit (sold separately)
is connected.
6 MAP button
Press to view the navigation
map screen or to switch
between view modes.
7
TRK (4/6) button
Press when the built-in DVD
drive source is selected to skip
a track or a chapter. Press and
hold to fast forward/fast reverse
a track or a chapter.
8
P.LIST (2/8) button
Switches preset channels dur-
ing radio operation.
9
TA/NEWS button
Press to turn the traffic
announcement function on or
off. Press and hold to turn the
NEWS function on or off.
Searching for destinations by address
HDD AV NAVIGATION HEAD UNIT
AVIC-HD3 II
Quick Start Guide
This guide is intended to guide you through the basic
functions of this navigation system. For details, please
refer to the operation manual and hardware manual
provided with the product.
Published by Pioneer Corporation.
Copyright © 2008 by Pioneer Corporation.
Printed in Belgium
All rights reserved. <CRB2635-A> EW
<KSKNX> <08A00000> MAN-HD3II-QSG-EN
1 2 3 4 5 6 7 8 9
Switching screens
AV screen Navigation map
1 4
5 6 7 8
3 2
MAN-HD3II-QSG-EN.indd 1-4 31/01/2008 12:30:59