Front panel, Mixing the sound of the microphone, Mixing the sound of a dj player, etc – Pioneer DDJ-SX User Manual

Page 28: Mixing the sound of an analog turntable, etc

Advertising
background image

28

En

Mixer section

a

b

2

2

c

e

d

9

3

1

7

2

4

8

3

3

3

1

6

4

4

7

7
8

5
6

1

TRIM control

2

EQ (HI, MID, LOW) controls

3

Channel Level Indicator

4

FILTER control

5

Headphones CUE/MIC TALK OVER button

6

Headphones CUE button

7

Channel fader

8

Crossfader Assign Switch

9

Crossfader

a

MASTER LEVEL control

b

Master level indicator

c

Booth monitor level control

d

HEADPHONES MIXING control

e

MASTER CUE button

Front panel

1

4

2

3

2

3

1

HEADPHONES LEVEL control

2

INPUT SELECT switch

3

INPUT SELECT switch

4

Crossfader curve selector control

Mixing the sound of the microphone

1 Connect a microphone to the [MIC1] or [MIC2]
terminal.

2 Start up the system.

= Starting the system (p.18)

3 Set the [INPUT SELECT] switch to [MIC1] or [MIC2].

4 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.

! The sound can be adjusted with the [EQ (HI, MID, LOW)] con-

trols, and filter effects can be applied to the respective channels
with the [FILTER] control.

Mixing the sound of a DJ player, etc.

1 Connect the DJ player or other line level output
device to the [CD] or [PHONO/LINE] terminals.

2 Start up the system.

= Starting the system (p.18)

3 Set the [INPUT SELECT] switch to [CD] or [LINE].

4 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.

! The sound can be adjusted with the [EQ (HI, MID, LOW)] con-

trols, and filter effects can be applied to the respective channels
with the [FILTER] control.

Mixing the sound of an analog turntable,

etc.

1 Connect the analog player or other phono level (for
MM cartridges) output device to the [PHONO/LINE]
terminals.

2 Start up the system.

= Starting the system (p.18)

3 Set the [INPUT SELECT] switch to [PHONO].

4 Operate the [TRIM] control and the channel faders to
adjust the audio level output from the respective decks.

! The sound can be adjusted with the [EQ (HI, MID, LOW)] con-

trols, and filter effects can be applied to the respective channels
with the [FILTER] control.

Advertising