Pioneer AVM-P9000R - Manual (Page 48)

47
Multi-CD Player
Operating Each Function
Repeat Play
There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player
Repeat. Default repeat play range is Multi-CD player Repeat.
1. Check to see “RPT” is currently highlighted.
If not, select that option by moving the joystick.
“RPT” is highlighted in green.
2. Click the joystick.
Each click changes the Repeat mode in the following
order:
Multi RPT
= Track RPT = Disc RPT
Display Repeat range
Track RPT One-track Repeat
Disc RPT Disc Repeat
Multi RPT Multi-CD player Repeat
Random Play
Tracks are played at random within the selected repeat play range as explained in “Repeat
Play” above.
1. Select “Random” by moving the joystick.
“Random” is highlighted in green.
2. Click the joystick.
Each click toggles Random play On/Off.
After selecting the desired repeat play range from those
referred to in “Repeat Play” above, switch Multi-CD
Player Random Play ON.
Display Play range
DISC RDM Disc Repeat
MULTI RDM Multi-CD player Repeat
Note:
• One-track Repeat changes to the Disc Repeat when you switch the Random Play ON.
Random Play range
Source plate
Repeat range
Source plate