Pioneer DEQ-P7000 - Manual (Page 16)

Additional Information
En 16
04
Section
Troubleshooting
Common
Symptom Cause Remedy
The power switch does not work.
No functions come on.
No sounds are heard.
The volume level will not rise.
Sound is not heard over a specific
speaker.
Cables or connectors are not
correctly connected.
The fuse is blown.
Cables are not connected
correctly.
The front, rear, left and right
speakers are not properly
adjusted in level balance.
The speaker size is set to OFF.
The speaker level is set to too
low.
The center speaker size is set
to SMALL or LARGE whereas
no center speaker is installed.
Check whether the cables are plugged in
correctly and firmly.
Remove the cause of the blowing of the
fuse, then replace the fuse. Be very sure
the same rated proper fuse is installed.
Connect the cables correctly.
Adjust the relative levels between the
speakers correctly. (See page 8.)
Make the correct size setting for the
speaker. (See page 10.)
Increase the speaker level setting to get
the balance right with the other speak-
ers. (See page 11.)
Set the center speaker size to OFF. (See
page 10.)