Pioneer PDP-506XDE - Manual (Page 31)

31
En
Basic Adjustment Settings 08
En
gl
is
h
9
Select “System” ( / ).
10
Select a sound system ( / ).
• You can select from among “B/G”, “D/K”, “I”, “L”, and
“L’”.
11
Select “Colour System” ( / ).
12
Select a colour system ( / ).
• You can select from among “Auto”, “PAL”, “SECAM”,
and “4.43NTSC”.
13
Select “Store” ( / ).
14
Select “Yes”, “Yes (Listed)”, or “No” ( / ).
• To set up for another channel, repeat steps 6 to 14.
15
Press HOME MENU to exit the menu.
NOTE
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as
a VCR or DVD recorder (DVR).
• Manual Adjust also allows you to make selections for “Tuner
NR”, “Child Lock”, and “Decoder”. See “Reducing video
noise”, “Setting Child Lock”, and “Selecting a decoder input
terminal”.
Reducing video noise
For the individual channels, you can specify whether the
Plasma Display System should reduce video noise depending
on the levels of broadcasting signals.
1
Repeat steps 1 to 6 provided for “ Using Manual Adjust”.
• After selecting a channel (using Programme Entry),
perform the following steps.
2
Select “Tuner NR” ( / ).
3
Select “On” or “Off” ( / ).
4
Press HOME MENU to exit the menu.
NOTE
• This function may not achieve a satisfactory result,
depending on the conditions of broadcasting signals.
• When using a decoder with a decoder terminal selected, this
function may fail to achieve a good result.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and
watched.
1
Repeat steps 1 to 6 provided for “ Using Manual Adjust”.
After selecting a channel (using Programme Entry),
perform the following steps.
2
Select “Child Lock” ( / ).
3
Select “Block” ( / ).
• The selection is switched between “View” and “Block”.
4
Press HOME MENU to exit the menu.
Selecting a decoder input terminal
If you have connected a decoder, select a decoder input
terminal (INPUT1).
1
Repeat steps 1 to 6 provided for “ Using Manual Adjust”.
After selecting a channel (using Programme Entry), do the
following steps.
2
Select “Decoder” ( / ).
3
Select “INPUT 1” ( / ).
4
Press HOME MENU to exit the menu.
NOTE
• With “Off” (factory default) selected, you cannot watch any
images from the decoder.
Item Description
Yes You can select the channel using P +/P –.
Yes (Listed) Select this option to register the channel as
your favourite channel.
You can select the channel using the Favourite
Channel list and
P +/P –.
No You cannot select the channel using P +/P –.
Manual Adjust
Search
System
Programme Entry
42.75MHz
1
B/G
System
Colour System
Store No
B/G
Auto
Colour System
Store
Tuner NR
Auto
Yes
On
Store
Tuner NR
Child Lock View
Yes
On
Tuner NR
Child Lock
Decoder Off
On
Block
Tuner NR
Child Lock
Decoder
On
Block
INPUT1
PDP506XDE.book Page 31 Friday, June 17, 2005 3:08 PM