Pioneer PDP-506XDE - Manual (Page 36)

36
En
Basic Adjustment Settings 08
7
Press HOME MENU to exit the menu.
Using the 3DYC and I-P Mode
1
Press HOME MENU.
2
Select “Picture” ( / then ENTER).
3
Select “Pro Adjust” ( / then ENTER).
4
Select “Others” ( / then ENTER).
5
Select an item to be adjusted ( / then ENTER).
• You can select “3DYC” or “I-P Mode”.
6
Select the desired parameter ( / then ENTER).
7
Press HOME MENU to exit the menu.
NOTE
• For the 3DYC, the individual parameters are selectable only
when:
You have selected INPUT 1, 2, or 3 as the input source and
“Video” as the input signal type (page 55); or
You have selected INPUT 5 as the input source without a
S-Video cable in connection; or
You have selected the analog tuner.
• For the I-P Mode, the individual parameters are not
selectable for the following input signals:
480p, 720p@60Hz, 576p, 720p@50Hz, 1080p@24Hz
Sound adjustments
You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV
Selection option. See page 33.
1
Press HOME MENU.
2
Select “Sound” ( / then ENTER).
3
Select an item to be adjusted ( / ).
4
Select the desired level ( / ).
5
Press HOME MENU to exit the menu.
NOTE
• To restore the factory defaults for all items, press / to
select “Reset” in step 3, and then press ENTER. A
confirmation screen appears. Press / to select “Yes”, and
then press
ENTER.
• You cannot adjust the sound quality for listening with
phones.
• If you perform sound adjustments with phones connected,
the new settings will become effective for sound from the
speakers after the phones are disconnected.
FOCUS
This shifts the sound coming direction (sound images) upward
and produces clear sound contours.
1
Press HOME MENU.
2
Select “Sound” ( / then ENTER).
3
Select “FOCUS” ( / ).
4
Select the desired parameter ( / ).
ACL
Performs such compensation that results in the optimum contrast
characteristics for images.
Selections Off Deactivates the ACL.
On Activates the ACL.
Gamma
Adjusts the gamma characteristics (image gradation characteristics).
Selections 1 Selects gamma characteristics 1.
2 Selects gamma characteristics 2.
3 Selects gamma characteristics 3.
3DYC
Optimises characteristics for separating brightness signals and colour
signals. This works for both video and still images.
Selections Off Deactivates the 3DYC.
High Enhanced 3DYC
Mid Standard 3DYC
Low Moderate 3DYC
I-P Mode
Perform optimum conversion from interlace signals to progressive
signals. This works for both video and still images.
Selections 1 Optimum for video images
2 Standard setting
3 Optimum for still images
Item button button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decreases audio from the
right speaker. Decreases audio from the
left speaker.
Bass
Balance
Treble
Reset
FOCUS
Front Surround
Headphone Output
Sub Volume
0
0
Off
Off
Main
2
Sound STANDARD
15
Reset
FOCUS
Front Surround Off
Off
PDP506XDE.book Page 36 Friday, June 17, 2005 3:08 PM