Pioneer PDP-503HDE - Manual (Page 31)

29
Programme Setup “Manual”
01
02
Lock
Off SAT.1
PRO7
03 KABEL
On
Programme Setup “Manual”
01
02
Decoder
Off
INPUT2
INPUT3
SAT.1
PRO7
03 KABEL
INPUT1
Basic adjustment settings
Setting the child lock
You can block the viewing of any channel.
On Programme Setup “Manual” menu
1
Press / / / to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press / to select “Lock”, and then press ENTER.
• Child lock menu displays.
3 Press / to set “Lock” to “On”, and then press
ENTER.
A
• Even if set to “On”, this function never works if not setting
password, See page 54 for the details on password
setting.
• Return to the previous menu by pressing n.
• Exit the menu by pressing MENU.
Decoder menu
Lock menu
ENTER
MENU
/ / /
Setting the decoder
When connecting a decoder to, you need assign the
terminal input.
On Programme Setup “Manual” menu
1
Press / / / to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press / to select “Decoder”, and then press
ENTER.
• Terminal inputs are displays.
3
Press / to select an INPUT terminal, and then
press ENTER.
A
• “Off” is factory preset value. When set to “Off”, you cannot
watch any image from decoders.
• Return to the previous menu by pressing n.
• Exit the menu by pressing MENU.
PDP-503HDE/(E)-c 8/31/02, 5:48 PM 29