Pioneer PDP-503HDE - Manual (Page 44)

42
Using external equipment
Option
MENU
Input Select
INPUT3 [COMPONENT]
Y/C
RGB
COMPONENT
AV
MONITOR OUTPUT S-VIDEO VIDEO R–AUDIO–L
(GRAY)
RS-232C
IN OUT
CONTROL
INPUT 3
INPUT 2
Y P B P R
COMPONENT
AC INLET
SYSTEM CABLE (WHITE)
INPUT 1
Media Receiver (rear view)
DVD player
Component cable (commercially available)
SCART cable
(commercially available)
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
When using component cable,
select “COMPONENT” for “Input
Select” in the menu.
Watching a DVD image
Connecting a DVD player
You can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment.
Displaying a DVD image
When connecting to the INPUT 3 terminal, select
“INPUT3” and set the correct input signal type on “Input
Select” in the menu. (See page 49.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
To watch a DVD image, select “INPUT3” from “INPUT
SOURCE” menu using b on the remote control unit
or INPUT on the Plasma Display. (See page 49.)
A
• Each time b is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your DVD player operation manual for the signal
type.
PDP-503HDE/(E)-d 9/2/02, 9:39 AM 42