When connecting to separately sold power, Connecting the units, When connecting to separately sold power amp – Pioneer AVH-P6600DVD User Manual

Page 6

Advertising
background image

When connecting to separately sold power amp

5

Connecting the Units

When you connect separately sold
multi-channel processor (e.g. DEQ-P6600)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).

Note:
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.

Note:
When you connect multi-channel processor to
this unit, separately sold power amp must be
connected to multi-channel processor.

This product

Front output
(FRONT OUTPUT)

Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)

Rear output
(REAR OUTPUT)

15 cm

23 cm

15 cm

Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).

Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).

Blue/white (6*)

The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.

Advertising