Power cord connection, Connecting to the input connectors, Pioneer dj cd players – Pioneer DJM-1000 User Manual

Page 6: Analog turntables, Other line level output devices, Digital output devices, Before using (connections), Connect the power cord last

Advertising
background image

BEFORE USING (CONNECTIONS)

6

<DRB1372>
En

Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet.

POWER CORD CONNECTION

Connect the power cord last.

÷ When all other connections are completed, connect the supplied power cord to the AC inlet located on the rear panel of this unit, and

connect the power plug to an AC outlet or auxiliary power socket on an amplifier.

÷ Be sure to use only the supplied power cord.

CONNECTING TO THE INPUT CONNECTORS

PIONEER DJ CD players

Connect the DJ CD player’s audio output connectors to one of the
sets of CD/LINE input connectors on the DJM-1000, and connect
the control cable to the corresponding channel’s CONTROL
connector. Switch the input selector switch of the connected
channel to [CD/LINE].
When using digital connections, connect the digital coaxial output
connector to one of the DIGITAL input connectors of the DJM-
1000, and switch the input selector switch of the connected
channel to [DIGITAL] (no digital input connectors are provided for
channel 1 and channel 2).

Analog turntables

Connect the audio output cables of the analog turntable to one set
of PHONO input connectors on the DJM-1000, and switch the input
selector switch of the connected channel to [PHONO]. The PHONO
input of the DJM-1000 supports MM cartridges.
The ground cable of an analog turntable is connected to one of the
SIGNAL GND terminals.

Other line level output devices

When connecting cassette decks or CD players, connect the audio
output connectors to one of the CD/LINE input connectors of the
DJM-1000, and switch the input selector switch of the connected
channel to [CD/LINE].
When the connection plug is a Ø6.3 mm phone plug, connect to
one of the LINE input connectors of the DJM-1000, and switch the
input selector switch of the connected channel to [LINE] (no LINE
input connectors are provided for channel 5 and channel 6). When
only the L channel is connected, the input in the L channel will be
input to the R channel as well.

Digital output devices

When using digital connections to devices such as CD players,
connect the device’s digital coaxial output connector to one of the
DIGITAL input connectors of the DJM-1000, and switch the input
selector switch of the connected channel to [DIGITAL] (no DIGITAL
input connectors are provided for channel 1 and channel 2).

MIDI OUT

INPUT

OUTPUT

POWER

VISUAL

(MONO)

(MONO)

(MONO)

L

L

L

R

R

L

R

R

2 RETURN 1

EFX 1

EFX 2

CONTROL

SOUND 1

2 SEND 1

SIGNAL GND.

PHONO

LINE

(MONO)

L

R

LINE

(MONO)

L

R

LINE

(MONO)

L

R

LINE

1

SIGNAL GND.

SIGNAL GND.

L

R

CONTROL

SOUND 2

PHONO

2

L

R

CONTROL

DIGITAL

PHONO

3

L

R

CONTROL

DIGITAL

PHONO

4

L

R

CONTROL

DIGITAL

PHONO

5

L

L

L

BOOTH

R

R

L

R

R

48k

96k

fs(Hz)

CONTROL

DIGITAL

DIGITAL OUT

PHONO

MASTER 1

MASTER 2

REC

SUBMIC

SUBMIC

CD / LINE

CD / LINE

CD / LINE

CD / LINE

CD / LINE

CD / LINE

6

MASTER ATT.

–12dB

–6dB

–3dB

0dB

3

COLD

1

2

GND

HOT

OFF

ON

(TRS)

AC IN

L

R

L

R

L

R

L

R

L

R

L

R

DJ CD player

DJ CD player

Analog turntable

Analog turntable

CD player, etc.

Cassette deck, etc.

Advertising