Pioneer AVH-X8500BT - Manual (Page 61)

! If “Update Failed!” appears on the screen,
touch Continue to proceed and start the re-
covery sequence.
Displaying the firmware
version
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the firm-
ware version. Perform the following procedure
to check the version on this unit.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch Firmware Information to display
to the version of the firmware of this
unit.
Setting MIXTRAX mode
Refer to Setting MIXTRAX mode on page 44.
Changing the picture
adjustment
You can adjust the Brightness (brightness),
Contrast (contrast), Color (color) , Hue (hue),
Dimmer (dimmer), and Temperature (tem-
perature) for each source and rear view cam-
era.
! You cannot adjust Hue for the audio
source.
! You cannot adjust Color and Hue for NAVI
and Apps.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 If you are adjusting the
Picture Adjustment, select the unit.
NAVI
Apps
Completing Picture Adjustment
for the Navigation system when
the RGB input setting is set to
QVGA NAVI or WVGA NAVI.
Completing
Picture Adjustment
for the AppRadio Mode when the
RGB input setting is set to iPhone.
Adjusting the Picture Adjustment
for the rear view camera.
Source Adjusting the Picture Adjustment
for the source.
4 Touch any of the following touch panel
keys to select the function to be adjusted.
Picture Adjustment items are displayed.
! Brightness – Adjusts the black intensity
! Contrast – Adjusts the contrast
! Color – Adjusts the color saturation
! Hue – Adjusts the tone of color (red or
green is emphasized)
! Dimmer – Adjusts the brightness of the dis-
play
! Temperature – Adjusts the color tempera-
ture, resulting in a better white balance
# You can adjust Hue only when the color sys-
tem is set to NTSC.
# With some rear view cameras, picture adjust-
ment may not be possible.
5 Touch c or d to adjust the selected
item.
Each time you touch c or d, the level of the
selected item increases or decreases.
# Dimmer can be adjusted from +1 to +48.
# Temperature can be adjusted from +3 to –3.
Notes
! You cannot operate this function while driving.
! Different Brightness/Contrast/Dimmer set-
tings can be set for when the illumination
switch is on and when it is off.
En
61
Section
17
System
settings
System settings