Menu operations, Rds setting, Switching auto pi seek – Pioneer AVH-3300BT User Manual

Page 63: Switching sound muting/ attenuation

Advertising
background image

RDS setting

Limiting stations to regional
programming

When AF is used, the regional function limits
the selection of stations to those broadcasting
regional programs.

1

Turn the unit off.

Refer to Basic operations on page 9.

2

Display the system menu.

Refer to Introduction of menu operations on
page 44.

3

Touch RDS Setup on the system menu.

4

Touch Regional on the menu to turn

the regional function on.

# To turn the regional function off, touch
Regional again.

Selecting alternative frequencies

When the tuner cannot get a good reception,
the unit automatically searches for a different
station in the same network.

1

Turn the unit off.

Refer to Basic operations on page 9.

2

Display the system menu.

Refer to Introduction of menu operations on
page 44.

3

Touch RDS Setup on the system menu.

4

Touch Alternative FREQ to turn AF on.

# To turn AF off, touch Alternative FREQ again.

Note

Sound may be temporarily interrupted by another
program during an AF frequency search.

Switching Auto PI Seek

The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.

1

Turn the unit off.

Refer to Basic operations on page 9.

2

Display the system menu.

Refer to Introduction of menu operations on
page 44.

3

Touch Auto PI on the system menu to

turn Auto PI Seek on.

# To turn Auto PI Seek off, touch Auto PI again.

Switching sound muting/
attenuation

Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal

when the muting or attenuation is can-
celed.

1

Display the system menu.

Refer to Introduction of menu operations on
page 44.

2

Touch Mute/ATT until the desired set-

ting appears.
Touch

Mute/ATT until the desired setting ap-

pears in the display.

! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a

stronger effect than

ATT

–10dB)

! ATT –10dB – Attenuation
! Off – Turns the sound muting/attenuation

off

Notes

! When Mute is displayed, the sound is turned

off and no audio adjustments can be made.

! When ATT is displayed, the sound is attenu-

ated and only the volume can be adjusted.
(No other audio adjustments can be made.)

! Operation returns to normal when the phone

connection is ended.

En

63

Section

13

Menu

operations

Menu operations

Advertising
This manual is related to the following products: