Setting guidelines on the rear view, Image, Setting guidelines on the rear view image – Pioneer AVH-X8600BT User Manual

Page 94: 19 system settings

Advertising
background image

! On:

Displays the guidelines.

When the gearstick is moved to the REVERSE
(R) position after setting the rear view camera,
the rear view image appears.

1

1 Switches the display to the

“Parking Assist”

screen.
p If you press and hold the MUTE button,

the rear view image disappears.

Setting guidelines on the
rear view image

CAUTION

! When adjusting the guidelines, be sure to

park the vehicle in a safe place and apply the
handbrake.

! Before getting out of the car to place the

markings, be sure to turn the ignition switch
off (ACC OFF).

! The range projected by the rear view camera

is limited. Also, the vehicle width and distance
guidelines displayed on the rear view camera
image may differ from the actual vehicle
width and distance. (The guidelines are
straight lines.)

! The image quality may deteriorate depending

on the usage environment, such as at night or
in dark surroundings.

1

Park your vehicle in a safe place and

apply the handbrake.

2

Using packing tape or similar, place

markings approximately 25 cm from each
side of the vehicle, and approximately
50 cm and 2 m from the rear bumper.

Rear bumper

25 cm

50 cm

25 cm

2 m

Markings

Markings

3

Press the HOME button to display the

Top menu screen.

4

Touch the following keys in the follow-

ing order.

The

“System” screen appears.

5

Touch [Camera settings].

6

Touch [Parking assist guide adjust].

7

Set the guidelines by dragging the four

points.

8

Touch the following keys to adjust the

position of the point if necessary.

Moves the point to the left.

Moves the point to the right.

Moves the point upward.

Moves the point downward.

Engb

94

Chapter

19

System settings

Advertising