Pioneer BDP-LX91 - Manual

02
Notice on the Addition of Functions to the
BDP-LX91
In addition to the functions described in the operating instructions, there are a number of other functions that have been added to the
BDP-LX91. These new functions are described in this notice. Also refer to the included operating instructions.
The additional functions are as follows:
• DTS-HD audio output
• Crossover frequency
• BD-LIVE
DTS-HD audio output
Output of the DTS Digital Surround and DTS-HD (DTS-HD High Resolution Audio and DTS-HD Master Audio) signals recorded on BD-ROMs
has changed.
• Before the function was added, the DTS Digital Surround signals included within the DTS-HD signals were converted to linear PCM or
analog audio signals for output. With the addition of the function, the DTS-HD signals are converted into linear PCM or analog audio
signals for output.
• When using with a 7.1-channel speaker system, a maximum of 7.1 channels of DTS Digital Surround signals are output.
For details, refer to the table below.
Changes are indicated in bold.
Caution
• The output from all terminals other than the ones selected for Audio does not sound as intended by the content provider.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD
and DTS-HD Master Audio | Essential are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights Reserved.
Audio format
AUDIO OUT (7.1 ch) terminals DIGITAL OUT terminals HDMI OUT (MAIN) terminal
2ch 1
1. When Audio Output Mode is set to 2 Channel or Multi-channel.
Multi-channel 1
Converted to
linear PCM audio 2
2. When DTS Out is set to DTS  PCM.
Not converted to
linear PCM audio 3
3. When DTS Out is set to DTS 1/DTS 2.
PCM 4
4. When HDMI Audio Out is set to PCM or Auto.
Auto 4
BD-ROM DTS Digital
Surround
Converted to 2-
channel audio
7.1-channel audio
Converted to 2-
channel audio
DTS Digital
Surround 5
5. When DTS Out is set to DTS 2, the secondary audio and interactive audio signals are not mixed in when outputting the DTS Digital Surround signals as a bitstream.
7.1-channel audio
DTS Digital
Surround 6,8
6. The secondary audio and interactive audio signals are not mixed in when outputting the DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround
signals as a bitstream.
DTS-HD High
Resolution Audio
7.1-channel
audio 7
7. When the output video resolution is set to 576i/480i or 576p/480p (480i or 480p for U.S. and Canadian models), the signals may be output in linear PCM (2 channels),
depending on the HDMI High Speed Transmission setting and/or the connected HDMI device(s).
DTS-HD High
Resolution
Audio 6,7,8
8. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in linear PCM (7.1 channels) or
DTS Digital Surround bitstream.
If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).
DTS-HD Master
Audio DTS-HD Master
Audio 6,8,9
9. When the output video resolution is set to 576i/480i or 576p/480p (480i or 480p for U.S. and Canadian models), the signals may be output as linear PCM 2-channel or
DTS Digital Surround bitstream signals, depending on the HDMI High Speed Transmission setting and/or the connected HDMI device(s).
< VRY1217-A >
En