Owner’s manual, Tad-r1 speaker system, Tad reference one – Pioneer TAD-R1 User Manual
Page 3: Before you start
3
TAD Reference One Owner’s Manual
Contents
INTRODUCTION ...................................... 4
TECHNOLOGY ........................................ 5
Beryllium Diaphragms..................................... 5
CST ................................................................ 5
Bass Drivers .................................................... 6
CST Mounting Construction ........................... 7
Bass Enclosure Construction ........................... 7
Crossover Networks ....................................... 7
Enclosure Finish.............................................. 7
INSTALLATION AND PLACEMENT ......... 8
Concerning The Placement Of This Unit.......... 8
Installing The Spikes ....................................... 9
Removing The Grille Covers............................ 9
Choosing Where To Place The Loudspeakers .. 10
CONNECTING THE LOUDSPEAKERS ...... 12
Single-Wire Connections.............................. 12
Bi-Wire Connections ..................................... 13
Bi-Amplification Connections ....................... 14
Vertical Bi-Amping .................................... 14
Horizontal Bi-Amping................................ 15
OPTIMIZING THE SYSTEM.................... 16
LOUDSPEAKER CARE ........................... 17
SPECIFICATIONS ................................... 18
DEAR CUSTOMER ................................. 19
Parts included
Check that the following items are located in the accessory kit:
• Shorting links x 2
• Cone-shaped spikes x 3
• Round spikes x 3
• Cleaning cloth x 1
• Hex wrench x 1
• This Owner’s Manual x 1
• Guide to unpacking unit x 1 (Attached to exterior of packaging)
Note
: Included parts may vary slightly by region.
BEFORE YOU START
TAD-R1_En.book 3 ページ ２００６年１２月４日 月曜日 午後２時４２分