Pioneer PDP 434HDE - Manual (Page 48)

10 Enjoying through External Equipment
48
En
Watching a VCR image
Connecting a VCR
Use the INPUT 2 or 3 terminal when connecting a VCR
and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV link” sys-
tems (page 49), you can connect the VCR to the INPUT
2 or 3 terminal on the Media Receiver using the fully-
wired 21-pin SCART cable.
AV link advanced system
• Download tuning information directly from TV to VCR
(Preset download).
• While watching TV, you can record a programme with
a one-touch press of the VCR recording button.
(WYSIWYR*)
* Refer to your VCR operation manual as some VCRs
have an exclusive key for WYSIWYR.
Displaying a VCR image
To watch a VCR image, press INPUT 2 on the remote
control unit or press INPUT on the Plasma Display to
select INPUT2.
• When you press the play button on the VCR, the
system automatically turns on from standby and
displays a VCR image.
• TV-VCR advanced “AV link” systems may not be
compatible with some external sources.
VCR
Media Receiver (rear view)
SCART cable
(commercially available)
SERVICE ONLY
i / o link.A
SELECT
CONTROL
SUB WOOFER
OUTPUT
INPUT 3
COMPONENT
S- VIDEO VIDEO R-AUDIO-L
MONITOR
OUTPUT
Y P B P R
VIDEO
I N OUT
INPUT 1
INPUT 2 INPUT 3
AC INLET
BLACK
WHITE
SYSTEM CABLE
INPUT
2 3
INPUT 1
INPUT 2 INPUT 3
• If VCR images do not come in clearly, you may need
to change the input signal type setting using the
menu. See pages 65 and 66.
• Refer to your VCR operation manual for the signal
type.