Pioneer BDP-LX71 - Manual (Page 2)

Speaker Setup
The following settings can be made at the speaker settings:
• Size of the different speakers
• Whether or not a subwoofer is connected
• Crossover frequency
This setting is only valid for the AUDIO OUT (7.1 ch) terminals.
The crossover frequency setting is the frequency (Hz) below which
the bass component of channels whose speaker size is set to
Small
is distributed to the subwoofer or left and right channels for output,
as well as the frequency (Hz) below which LFE signals (the channel
normally output to the subwoofer) are output.
Changing the speaker setup
• When there are no speakers whose speaker size is set to Small,
select Bypass for the crossover frequency.
• When there are speakers whose speaker size is set to Small,
select the crossover frequency ( Bypass cannot be selected).
1 When playback is stopped, display the Home Menu screen.
Press HOME MENU.
2 Select and set Initial Setup  Speakers  Speaker Setup
 Next Screen.
Use
/ to select, then press ENTER.
3 Select the speaker and change the setting.
Use / to select, then use / to change the setting.
• L/R (front left and right speakers): Large/Small
• C (center speaker): Large/Small/None
• SL/SR (left and right surround speakers): Large/Small/None
• SBL/SBR (left and right surround back speakers): Large/Small/
None
• SW (subwoofer): Yes/No
• Crossover: Bypass/50 Hz/80 Hz/100 Hz/150 Hz
Note
• Depending on the combination of settings of the different
speakers, the settings of speakers other than the one you have
changed may also change automatically.
• When a subwoofer with a filter bypass function is connected
and there is no speaker whose speaker size is set to Small, if the
subwoofer’s filter is set to be bypassed, the player’s high
precision digital filter is used. In this case, set the crossover
frequency to something other than
Bypass.
• By default, the crossover frequency is set to Bypass.
• Before the function was added, the crossover frequency was set
to 100 Hz if there were speakers whose speaker size was set to
Small. Otherwise, it was set to Bypass.
• After the functions are added, all of the speaker settings are
reset. To use 7.1-channel analog output signals, check the
speaker settings.
Image file playback
Image files recorded on DVDs or CDs can be played.
Caution
• In DVD, only the one recorded by the ISO 9660 file system can be
played.
Playable files
 Supported image file formats
• JPEG
File format: JFIF Ver1.02/Exif Ver.2.2
Resolution: Up to 4096 x 4096 pixels
Only baseline JPEG files are supported.
 Playable file extensions
• Image files
.jpg .jpeg
Playing image files
1 Press HOME MEDIA GALLERY to display the Home Media
Gallery.
The Home Media Gallery can also be displayed by selecting
Home
Media Gallery from the Home Menu then pressing ENTER.
2 Select the disc  Photos  Folders or All Photos.
Use / to select, then press ENTER.
• Folders – The files in the selected folder are displayed.
• All Photos – All the recorded files are displayed.
If you have selected All Photos, proceed to step 4.
3 Select the folder containing the file you want to play.
Use /// to select, then press ENTER.
A list of the files and folders in the selected folder is displayed.
4 Select and set the file you want to play.
Use /// to select, then press ENTER.
A slideshow starts from the selected file, and continues until the end
of the list is reached.
Slideshows can also be started by selecting Slideshow from the
TOOLS menu.
L/R
C
SL/SR
SBL/SBR
SW
Large
Large
Large
Large
Yes
Crossover Bypass
Speaker Setup
BD PLAYER
My Folder
DVD-RW/Photos/Folders
99 items
2G_versionup_en_wv_ibd.fm 2 ページ ２００９年４月２３日 木曜日 午後６時１３分