Pioneer AVH-P3100DVD - Manual (Page 17)

Notes
! Listening MW/LW radio while an iPod is
charged from this unit may generate noise. In
this case, disconnect the iPod from this unit.
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only ac-
tive when your radio is tuned to an RDS
station.
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
1 Touch List to display the preset list.
2 When you find a frequency that you
want to store in memory keep touching
one of preset tuning keys P1 to P6 until the
beep sounds.
The selected radio station frequency has been
stored in memory.
The next time you touch the same preset tun-
ing key the radio station frequency is recalled
from memory.
# When P1 to P6 are not displayed, you can dis-
play them by touching
List.
# You can also use a and b to recall radio sta-
tion frequencies assigned to preset tuning keys
P1 to P6.
3 Touch ESC to return to the ordinary dis-
play.
Displaying the PTY
information
PTY (program type ID code) information can
be displayed.
% Touch INFO.
PTY is displayed for eight seconds.
PTY (program type ID code) information is
listed in the following section. Refer to page
20.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio texts.
1 Touch Text to display radio text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by touching
ESC.
# When no radio text is received, No Text ap-
pears in the display.
2 Touch PREV or NEXT to recall the three
most recent radio texts.
# If there is no radio text data in memory the dis-
play will not change.
Storing and recalling radio text
You can store data from up to six radio text
transmissions for keys
Memo1 to Memo6.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on this page.
2 Touch any keys Memo1 to Memo6 and
hold to store the selected radio text.
The memory number will display and the se-
lected radio text will be stored in memory.
The next time you press the same button in
the radio text display the stored text is recalled
from memory.
Radio
En
17
Section
05
Radio