Controls and displays 04 – Pioneer VSX-818V-K User Manual

Page 28

Advertising
background image

Controls and displays

04

28

En

8

Number buttons and other component

controls

Use the number buttons to directly select a
radio frequency (page 46) or the tracks on a
CD, DVD, etc. There are other buttons that can
be accessed after the

RECEIVER

button is

pressed. (For example

MIDNIGHT

, etc.)

TUNER DISP*

Switches between named station presets
and radio frequencies (page 47).

CLASS*

Switches between the three banks
(classes) of radio station presets (page 47).

MPX*

Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality (page 46).

D.ACCESS*

After pressing, you can access a radio
station directly using the number buttons
(page 46).

MIDNIGHT

Switches to Midnight or Loudness
listening

(page 34).

ANALOG ATT

Attenuates (lowers) the level of an analog
input signal to prevent distortion.

DIMMER

Dims or brightens the display.

SLEEP

Press to change the amount of time before
the receiver switches into standby (

30 min

– 60 min – 90 min – Off

). You can check

the remaining sleep time at any time by
pressing

SLEEP

once.

SIGNAL SEL

Use to select an input signal (page 36).

SR +

(VSX-918V model only)

Switches the SR+ mode on/off (page 63).

EON*

Use to search for programs that are
broadcasting traffic or news information
(page 49).

iPod CTRL

Switches between the iPod controls and
the receiver controls (page 59).

DISC (ENTER)

Use to enter commands for TV or DTV, and
also use to select a disc in a multi-CD
player.

9

INFO

Use to bring up information screens on a
digital TV.

10

SHIFT

Press to access the ‘boxed’ commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (

*

) in this section.

11 Remote control LED

Lights when a command is sent from the
remote control.

12

SOURCE

Press to turn on/off other components
connected to the receiver (see page 54 for
more on this).

13 RECEIVER

Switches the remote to control the receiver
(used to select the green commands above the
number buttons (

SETUP

, etc)). Also use this

button to set up surround sound (page 37).

VSX_918_818_MY.book 28 ページ 2007年12月27日 木曜日 午後4時27分

Advertising
This manual is related to the following products: