Listening to your system 05 – Pioneer VSX-818V-K User Manual

Page 35

Advertising
background image

Listening to your system

05

35

En

English

Français

Deutsch

Nederlands

Italiano

Español

a.

You can change the MIDNIGHT/LOUDNESS options at any time by using

MIDNIGHT

button.

b.

The tone controls are only available when Stereo, Auto level control stereo mode or Front Stage Surround
Advance mode are selected (except when

STEREO

is selected using

AUTOSURR.

).

c.

Only available with 2-channel sources in Dolby Pro Logic II Music mode.

d.

This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

e.

You can change the Dialog Enhancement options at any time by using

DIALOG

button.

DUAL MONO

d

Specifies how dual mono encoded Dolby Digital
soundtracks should be played.

CH1

Channel 1 is heard only

CH2

Channel 2 is heard only

CH1 CH2

Both channels

heard from front speakers

DRC
(Dynamic Range
Control)

Adjusts the level of dynamic range for movie soundtracks
optimized for Dolby Digital and DTS (you may need to use
this feature when listening to surround sound at low
volumes).

OFF

MAX

MID

Dialog Enhancement

e

Localizes dialog in the center channel to make it stand out
from other background sounds in a TV or movie
soundtrack.

OFF

ON

Sound Delay

Some monitors have a slight delay when showing video, so
the soundtrack will be slightly out of sync with the picture.
By adding a bit of delay, you can adjust the sound to match
the presentation of the video.

0.0

to 6.0 (frames)

1 second = 25 frames

(PAL)

LFE ATT
(LFE Attenuate)

Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the sound
from the speakers.
The LFE is not limited when set to 0 dB, which is the
recommended value. When set to –10 dB, the LFE is
limited by the respective degree. When OFF is selected, no
sound is output from the LFE channel.

LFEATT 0

(0 dB)

LFEATT 10 (–10 dB)/

LFEATT ** (OFF)

HDMI

(VSX-918V model only)

Specifies the routing of the HDMI audio signal out of this
receiver (amp) or through to a TV or flat screen TV.

AMP

THRU (Through)

Setting

What it does

Option(s)

VSX_918_818_MY.book 35 ページ 2007年12月27日 木曜日 午後4時27分

Advertising
This manual is related to the following products: