Pioneer VSX-818V-K - Manual (Page 49)

Using the tuner 07
49
En
English
Français
Deutsch
Nederlands
Italiano
Español
3 Press ST / ( ST +/– ) to select the
program type you want to hear.
4 Press ENTER to search for the program
type.
The system starts searching through the
station presets for a match. When it finds one,
the search stops and the station plays for five
seconds.
5 If you want to keep listening to the
station, press ENTER within the 5 seconds.
If you don’t press ENTER , searching resumes.
If NO PTY is displayed it means the tuner
couldn’t find that program type at the time of
the search.
1
Using EON
When EON (Enhanced Other Network
information) is turned on, the receiver jumps to
an EON-linked broadcast when it begins, even
if a receiver function other than the tuner is
being used. It can’t be used in areas that EON
information isn’t transmitted and when FM
broadcast stations don’t transmit PTY data.
When the broadcast ends, the tuner returns to
the original frequency or function.
1 Press FM to select the FM band. 2
2 Press EON (SHIFT+9) to select one of the
possible modes.
Press repeatedly to switch between:
• EON TA (Traffic Announcement) – Sets
the tuner to pick up traffic information
when it is broadcast.
• EON NEWS – Sets the tuner to pick up
news when it is broadcast.
• OFF – Switches off the EON feature.
When set to TA or NEWS , the EON indicator in
the display lights (it flashes when receiving an
EON broadcast).
3
The indicator in the
display lights when the current station carries
the EON service.
4
Note
1 RDS searches station presets only. If no stations have been preset, or if the program type could not be found among the station
presets NO PTY is displayed. FINISH means the search is complete.
2 EON is only possible in the FM band.
TV CTRL
TV/SAT DVR/VCR
AM FM
CD-R
CD
PORTABLE
iPod DVD/BD
RECEIVER
MULTI CONTROL
AUTO/DIRECT ADV SURR
SOUND
STEREO/
A.L.C.
ACOUSTIC
STANDARD
TV CONTROL
SIGNAL SEL
TV CH INPUT
SELECT
SR + iPod CTRL
INFO
SHIFT TV VOL
+ 10
EON
3 You can’t search for traffic announcements and news at the same time.
4 • You cannot operate the
T.EDIT and PTY SEARCH buttons while the EON indicator in the display is lit.
• If you want to change to a function other than the tuner when the EON indicator is flashing, press EON (SHIFT+9) to turn
EON off.
VSX_918_818_MY.book 49 ページ ２００７年１２月２７日 木曜日 午後４時２７分