Sleep timer using a password (av mode only), Entering a password changing the password, Useful adjustment settings 11 – Pioneer PDP-507XD User Manual

Page 55: Sleep timer, Using a password (av mode only)

Advertising
background image

55

En

Useful Adjustment Settings

11

English

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.

1

Press

HOME MENU.

2

Select “Sleep Timer” ( / then

ENTER).

3

Select the desired time ( / then

ENTER).

• You can select from among “Off” (cancel), “30 min”, “60

min”, “90 min”, and “120 min”.

4

Press

HOME MENU to exit the menu.

NOTE

• Five minutes before the selected time elapses, the remaining

time appears every minute.

• To check the remaining time, perform steps 1 and 2. After

checking the time, press

HOME MENU to restore the

previous display.

Using a password (AV mode only)

The Plasma Television provides the Child Lock and Channel
Lock functions for preventing children from watching
inappropriate programmes. You need to enter a password
when watching programmes with “Block” specified. Before the
system is shipped, “1234” is preset as the factory-default
password. You can however, change the password as you
want.

When using the Home menu you select “Auto Installation”,
“Analogue TV Setup”, “DTV Setup”, or “Password”, a screen
prompting password entry appears to prevent others from
changing the programme settings at their choices.

Entering a password

If you select a channel blocked with Child Lock or Channel Lock
or if password entry is requested when attempting to open the
menu, enter a password correctly.

1

Enter a correct 4-digit password using buttons

0 to 9.

NOTE

• If you fail password entry three times, “Invalid password.”

appears, and the menu is closed. In order to display the
password entry screen again to unlock the password, select
the blocked channel or open the menu again.

• If the password entry screen disappears before entry, you

may recall it by pressing

ENTER.

Changing the password

Use the following procedure to change the password.

1

Press

HOME MENU.

2

Select “Setup” ( / then

ENTER).

3

Select “Password” ( / then

ENTER).

• The password entry screen appears. Enter the current 4-

digit password using buttons

0 to 9.

4

Select “Change Password” ( / then

ENTER).

5

Enter a 4-digit password to be newly set, using buttons
0 to 9.

6

Enter the same password that you have entered in step 5.

• If an unmatching password is entered, the operation

goes back to step 5 for reentry from the beginning.

• If you fail password change three times by entering

unmatching passwords, the menu is closed.

7

Press

HOME MENU to exit the menu.

NOTE

• Take a note of the newly set password and keep it handy.

Please Input Your Password.

Change Password

Please Input New Password.

Reconfirm New Password.

PDP507XDE.book Page 55 Friday, June 2, 2006 3:07 PM

Advertising
This manual is related to the following products: