Using i/o link.a, Enjoying through external equipment 12 – Pioneer PDP-507XD User Manual

Page 59

Advertising
background image

59

En

Enjoying through External Equipment

12

English

NOTE

• If you select a parameter other than “Auto”, make such a

setting that results in natural colour.

• If no image appears, specify another digital video signal type.

• For the digital video signal types to be specified, check the

operation manual that came with the connected equipment.

To specify the type of audio signals:

When you use the INPUT 3 HDMI terminal, use the following
procedure to specify the type of audio signals.

1

Repeat steps 1 to 3 provided for “

To activate the HDMI

terminal.

2

Select “Audio” ( / then

ENTER).

3

Select the type of audio signals ( / then

ENTER).

• If you select “Auto”, an attempt will be made to identify

the type of audio signals when audio signals are
received.

4

Press

HOME MENU to exit the menu.

NOTE

• The INPUT 4 HDMI terminal accepts only digital audio

signals.

• If no sound is output, specify another audio signal type.

• For the audio signal types to be specified, check the

operation manual that came with the connected equipment.

• Depending on the equipment to be connected, you also need

to connect analogue audio cables.

Using i/o link.A

The Plasma Television incorporates three typical i/o link.A
functions for smooth connections between Plasma Television
and other audiovisual equipment.

One Touch Play

While the Plasma Television is in standby mode, it
automatically turns on and plays back images from the
audiovisual source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the
WYSIWYR button, you can automatically start recording by
pressing the WYSIWYR button.

Preset Download

Automatically transfers channel preset information from the
tuner on the Plasma Television to the one on the connected
audiovisual equipment (e.g. VCR) via the INPUT 2 or 3 terminal.

To select the SCART terminal which is available for

i/o link.A:

Select the INPUT terminal to which the recording equipment
(e.g. VCR) you use has been connected.

1

Press

HOME MENU.

2

Select “Setup” ( / then

ENTER).

3

Select “i/o link.A” ( / then

ENTER).

4

Select the desired parameter ( / then

ENTER).

5

Press

HOME MENU to exit the menu.

NOTE

• The i/o link.A functions work only when the audiovisual

equipment is connected to the INPUT 2 or 3 terminal on the
Plasma Television with i/o link.A via a fully wired 21-pin
SCART.

• Refer to operation manuals of each external equipment for

the details.

• If a SCART cable has been connected to the INPUT 3

terminal with the i/o link.A activated, input signals (other
than Component) are automatically identified and displayed.
If the i/o link.A has been deactivated, Video is always
selected for signals other than RGB because the system
cannot identify among RGB, Y/C (S-Video), and CVBS (Video)
signals; for example, receiving Y/C (S-Video) signals results
in monochrome display.

Item

Description

Auto
(factory default)

Automatically identifies input audio signals.

Digital

Accepts digital audio signals.

Analogue

Accepts analogue audio signals.

Item

Description

INPUT 2
(factory default)

INPUT 2 is available for i/o link.A.

INPUT 3

INPUT 3 is available for i/o link.A.

Plasma Television (rear view)

SCART cable
(commercially available)

VCR or DVD/HDD
Recorder (DVR)

PDP507XDE.book Page 59 Friday, June 2, 2006 3:07 PM

Advertising
This manual is related to the following products: