Pioneer MJ-L77 - Manual (Page 21)

6 More Recording Features
21
<ARB7195>
In Use
1 Press MENU and select INPUT SEL.
This menu option is only available when the disc is stopped.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
2 Switch to ANALOGUE (or AUTO) using the
$ and › buttons.
3 Press SET to exit the menu.
The DIGITAL indicator in the display lights when AUTO is selected.
1 Press MENU and select REC MODE.
This menu option is only available when the disc is stopped.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
2 Switch to MONO LP or STEREO SP using
the
$ and › buttons.
3 Press SET to exit the menu.
The MONO LP indicator in the display lights when MONO LP is selected.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU SET
4 ¢
Selecting Analogue Input Recording
When recording a CD from the CD receiver, you can specify that the recording should
be via the analogue input of the MJ–L77 rather than the optical digital cable. This can
be useful if you run up against an SCMS copying problem from a CD-R disc, for
example. If the disc is copy protected you'll see the message
CAN ' T COPY in the
display. If this happens, switch the input select to analogue, then start recording.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU SET
4 ¢
The MONO LP indicator lights in
long-play mode
Switch to mono for long-play
By default, auto input is active
and the
DIGITAL indicator is lit
The DIGITAL indicator disappears
when analogue input is selected