Pioneer MJ-L77 - Manual (Page 22)

6 More Recording Features
22
<ARB7195>
Recording an Analogue Source
On pages 14 and 15 we covered synchro-recording from a CD or tape. Here's how to
record any source, including a component connected via the AUX inputs on the CD
receiver. (To record from a digital component directly see the following page.)
1 Prepare for recording.
❖ load a recordable MD
❖ switch on/off the auto mark (track numbering)
❖ switch record mode to stereo or mono long-play
2 Switch to the source you're going to
record.
For example, to record from the auxiliary input, press the AUX button (if the
display shows AUX (Digital), press AUX again).
3 Prepare the source for recording.
Switch on the component and load the source material, etc.
4 Press MD REC.
The MD recorder goes into record-pause mode.
5 Press the MD button to start recording.
Alternatively, press
^ on the MD recorder’s front panel.
6 Playback the source (if necessary).
7 During recording:
❖ To pause the recording, press MD (or
^ on the front panel). To
resume, press again.
❖ To start a new track on the MD, press MD REC .
8 When you're done, press
& to stop
recording.
Eject the disc (press
) on the front panel) before switching off the system.
Auto mark is active; recording
mode is stereo (standard play)
Recording will be from the
analogue auxiliary inputs
The MD record indicator flashes
in record-pause mode. During
recording it remains lit
The record indicator disappears
once you stop recording
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MD REC
MD