Connecting the power cord, Connecting the units – Pioneer AVH-P3100DVD User Manual

Page 6

Advertising
background image

6

Connecting the units

Connecting the power cord

Speaker leads
White: Front

left

White/black: Front

left

Gray: Front

right

Gray/black: Front

right

Green: Rear

left

 or subwoofer 

Green/black: Rear

left

 or subwoofer 

Violet: Rear

right

 or subwoofer 

Violet/black: Rear

right

 or subwoofer 

ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to connect
to both connectors.

When you connect the separately sold
multi-channel processor (DEQ-P6600) to this
unit, do not connect anything to the speaker
leads and system remote control (blue/white).

Note:
Depending on the kind of vehicle, the
function of 3* and 5* may be different. In
this case, be sure to connect 2* to 5* and
4* to 3*.

1*

2*

4*

3*

5*

Cap (1*)
Do not remove cap if this
terminal is not in use.

Yellow (3*)
Back-up
(or accessory)

Yellow (2*)
Connect to the constant 12 V
supply terminal.

Connect leads of the same
color to each other.

Fuse (10 A)

Fuse resistor

Red (5*)
Accessory
(or back-up)

Red (4*)
Connect to terminal controlled by
ignition switch (12 V DC).

Black (chassis ground)
Connect to a clean, paint-free metal location.

This product

Antenna input

Orange/white
Connect to lighting switch terminal.

Fuse resistor

Advertising