01 connecting the units, English – Pioneer AVH P4300DVD User Manual

Page 9

Advertising
background image

Notes:
· Change the initial setting of this unit (refer to the Operation Manual).

The subwoofer output of this unit is monaural.

· When using a subwoofer of 70 W (2

Ω) , be sure to connect with Violet

and Violet/black leads of this unit. Do not connect anything to Green
and Green/black leads.

Connection method

1. Clamp the lead.

2. Clamp firmly with

needle-nosed pliers.

Note:
· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or dealer.

Yellow/black
If you use an equipment with Mute function, wire this lead to
the Audio Mute lead on that equipment. If not, keep the Audio
Mute lead free of any connections.

Light green
Used to detect the ON/OFF status of the parking brake. This lead
must be connected to the power supply side of the parking brake
switch.

Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).

Blue/white (6*)
Connect to auto-antenna relay control terminal
(max. 300 mA 12 V DC).

The pin position of the ISO
connector will differ depending on
the type of vehicle. Connect 5* and
6* when Pin 5 is an antenna control
type. In another type of vehicle,
never connect 5* and 6*.

Blue/white (5*)

Ground side

Power supply side

Parking brake
switch

Microphone
(AVH-3300BT only)

Fuse resistor

Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.

Wired remote input
Hard-wired remote control adaptor can be connected (sold separately).

<QRD3082-A/N>9

En

9

English

Section

01

Connecting the units

Advertising
This manual is related to the following products: