Pioneer AVH-P4100DVD - Manual (Page 19)

Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
! The default setting for Auto PI Seek is off.
Refer to Switching Auto PI Seek on page 55.
Limiting stations to regional
programming
When AF is used, the regional function limits
the selection of stations broadcasting regional
programs.
% Touch Regional on the function menu
to turn the regional function on.
# To turn the regional function off, touch
Regional again.
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear from the
display if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network
’s TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
work
’s TP station.
TRFC indicator lights.
2 Touch TA on the function menu.
dTRFC appears in the display. Traffic an-
nouncement standby is now on.
# If you turned TA function on while tuned in to
neither a TP nor an enhanced other network
’s TP
station, dimmed TRFC indicator lights.
# To turn traffic announcements standby off,
touch
TA again.
3 Press +/
– (VOLUME) to adjust the TA vo-
lume when a traffic announcement begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Touch TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until
TA is touched
again.
Notes
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other network’s TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Radio
En
19
Section
05
Radio