Pioneer RS-D7RII - Manual (Page 80)

80
Connecting the Units
This Product
Clear
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Clear/black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any
connections.
IP-BUS cable
Antenna jack
IP-BUS output (Black) 15 cm
15 cm
IP-BUS input (Blue)
15 cm
Blue/white
To system control terminal of the power
amp or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Multi-CD player
(sold separately)
Fuse holder
(4 A)
Fuse resistor
Fuse resistor
Optical input (Blue)
Optical output (Black)
Power cable connection
Fig. 4