Pioneer DEH-P6700MP - Manual (Page 34)

Introduction of audio
adjustments
1 CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
2 Equalizer curve
Shows which equalizer preset is currently
selected.
3 Audio display
Shows the audio adjustments status.
4 SW indicator
Shows when the subwoofer output is turned
on.
5 EQ-EX indicator
Appears in the display when EQ-EX function
can be activated.
6 LOUD indicator
Appears in the display when loudness is
turned on.
% Press AUDIO to displaythe audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer
curve adjustment)BASS (bass and treble
level adjustment)LOUD (loudness)
SUB, W (subwoofer on/off setting)/NOFAD
(non fading output on/off setting)80: 0 (sub-
woofer setting)/NOFAD (non fading output
setting)HPF (high pass filter)SLA (source
level adjustment)
# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
BASS.
# When the subwoofer controller setting is only
P/O:FUL, you cannot switch to SUB, W. (Refer to
page 41.)
# You can select the 80: 0 only when subwoofer
output is turned on in the SUB, W.
# When the subwoofer controller setting is only
P/O:FUL, you can switch to the nonfading output
on/off setting. (Refer to page 41.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Compensating for
equalizer curves (EQ-EX)
The EQ-EX function smoothes the effects of
each equalizer curve. Furthermore, you can
adjust bass and treble for each source when
CUSTOM curve is selected.
% Press and hold SW to turn EQ-EX on.
EQ-EX:ON appears in the display. EQ-EX is
now on.
# To turn EQ-EX off, press and hold SW.
# If you do not operate the EQ-EX within about 8
seconds, the EQ-EX function is cancelled auto-
matically.
Audio Adjustments
En
34
Section
09