Improving poor fm reception, Memorizing stations, Listening to station presets – Pioneer DCS-370 User Manual

Page 13: Listening to other sources, Setting the sleep timer, S l p, Getting started 02

Advertising
background image

Getting started

02

13

En

English

Français

Deutsch

Nederlands

Italiano

Español

Improving poor FM reception

If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.

1

Tune to an FM radio station then press

SETUP.

2

Use

/ to choose FM MODE then press

ENTER.

3

Use

/ to select FM MONO then press

ENTER.
The mono indicator (

) lights when the tuner

is in mono reception mode.

Select

FM AUTO above to switch back to auto-

stereo mode (the stereo indicator (

) lights

when receiving a stereo broadcast).

Memorizing stations

You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.

1

Tune to an AM or FM radio station.

For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.

2

Press SETUP and use

/ to choose

‘ST.MEM.’ then press ENTER.

3

Use

/ to select the station preset you

want then press ENTER.

Listening to station presets

1

Make sure the TUNER function is

selected.

2

Use the ST +/– buttons to select a station

preset.

• You can also use the number buttons to do

this.

Listening to other sources

You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components
on page 32 for more on this.

• To connect a USB device to the USB

terminal, see USB playback on page 23.

1

Make sure that the external source (TV,

satellite receiver, etc.) is switched on.

2

Press LINE to select the source.

Each press switches between

LINE1 and

LINE2.

3

If necessary, start playback of the source.

Setting the sleep timer

The sleep timer switches off the system after
about an hour so you can fall asleep without

worrying about it.

1

Press SHIFT+SLEEP repeatedly to select an

option then press ENTER.
Choose between the following options:

SLP ON – Switches off after about an hour

SLP OFF – Cancels the sleep timer

After selecting

SLP ON, you can press

SHIFT+SLEEP again to check how much time is
left. Each line indicates approximately 12
minutes (remaining):

Note

1 The display dims when the sleep timer is set, and the power indicator is turned off.

S L P - - - - -

DCS-363.book 13 ページ 2007年1月16日 火曜日 午前11時55分

Advertising
This manual is related to the following products: