Pioneer DCS-370 - Manual (Page 35)

Other connections 09
35
En
Engli
sh
Françai
s
Deut
sch
Nederland
s
Italiano
E
spañol
About control out connections
Many Pioneer components support SR
CONTROL connections, by which you can use
the remote controls of any connected
components by aiming them at the sensor of
just one component. When you use a remote
control, the control signal is passed along the
chain to the appropriate component. This can
be useful when you have multiple components
contained inside an entertainment center.
If you use this feature, you must make sure that
also have at least one set of analog audio jacks
connected to another component for
grounding purposes.
• Using a cable with mono mini-plugs on
either side (sold separately), connect the
CONTROL IN jack on another Pioneer
component to the CONTROL OUT jack on this
unit.
This will allow you to control the other
component by pointing its remote at this unit.
DCS-363.book 35 ページ ２００７年１月１６日 火曜日 午前１１時５５分