Connecting to other devices, Branchement à d’autres dispositifs, Branchement du cordon d’alimentation – Pioneer DMP-555 User Manual

Page 12: Connecting the power cord

Advertising
background image

12

En/Fr

C Connecting to a component with a digital input

terminal

CD recorder or amplifier
with digital inputs
Graveur CD ou amplificateur à
entrées numériques

Digital signal cable
Câble de signal numérique

DMP-555

4. Connecting to other devices

A Connecting to other mixers

Connect the AUDIO OUT and CARD MONITOR terminals on the unit with the
Line In terminals or AUX terminals on the mixer.
(Do not use the Phono terminals. Otherwise the sound will become distorted and
prevent normal playback.)

B Connecting to a stereo amplifier (when not using a DJ

mixer)

Stereo amplifier
Amplificateur stéréo

Connect to the AUX input terminals.
(Do not use the Phono input terminals.)
Branchez sur la borne d’entrée AUX.
(N’utilisez pas la borne d’entrée Phono.)

Supplied audio cable
Câble audio fourni

4. Branchement à d’autres dispositifs

A Branchement à d’autres mixeurs

Raccordez les bornes AUDIO OUT et CARD MONITOR de cet appareil sur les
bornes LINE IN ou AUX du mixeur.
(N’utilisez pas les bornes PHONO car le son serait distordu et une lecture normale
ne serait pas possible.)

B Branchement à un amplificateur stéréo (sans emploi

d’un mixeur DJ)

C Branchement à un composant doté d’une borne

d’entrée numérique

÷ Réglez l’interrupteur de Mode Numérique (DIGITAL OUT) sur ON si vous

utilisez la borne de sortie numérique.

REMARQUE :
Lorsque l’interrupteur de Mode Numérique (DIGITAL OUT) est réglé sur
ON, les fonctions DJ (Repérage, Bouclage, Rebouclage, Réglage tempo, Volant
de commande, Mixage de carte et Isolateur) n’agissent pas. Le mode de pause
inaudible est utilisé à la place du mode de pause audible.

5. Branchement du cordon d’alimentation

Tous les branchements étant réalisés, branchez la fiche du cordon d’alimentation
sur une prise secteur ou sur la prise de courant sur le panneau arrière de
l’amplificateur.

DMP-555

BEFORE OPERATIONS

CONNECTIONS

CONNEXIONS

AVANT LA MISE EN SERVICE

÷ Set the Digital mode switch (DIGITAL OUT) to ON when using the digital

output terminal.

NOTE:
When the Digital mode switch (DIGITAL OUT) is set to ON, the DJ functions
(cue, loop, reloop, tempo adjust, Jog dial, Card mixing and Isolator) do not
work. And the muted pause mode is used instead of the audible pause mode.

5. Connecting the power cord

When all connections have been made, connect the power plug to an AC wall outlet
or to a power receptacle on the rear panel of the amplifier.

Advertising