Pioneer SPX-HUD01 - Manual (Page 20)

Black plate (20,1)
Configuring the unit
function settings
Unit function settings can be configured from
the
Settings screen.
CAUTION
! This unit disables operation of the unit whilst
the vehicle is in motion. Park the vehicle in a
safe place and apply a hand brake before op-
erating this unit.
! If the vehicle starts moving whilst setting the
unit functions, the Settings screen will close
automatically.
% Press the button.
The Settings screen appears.
Menu Description
Display Settings
Adjust the display settings
for projected images.
Function Settings Set the function settings.
Language Set the display language.
About
Confirm the unit software
version and legal notices.
Reset All Settings Restore the default settings.
Notes
! Function Settings can only be set when the
communication with the navigation applica-
tion has been established.
! Press the button to close the Settings
screen.
! For details, refer to the operation manual.
Adjusting the angle of the
combiner
Adjust the angle of the combiner to the seat po-
sition.
CAUTION
Hold onto the edges of the combiner when ad-
justing the angle.
1 Open the diffuser and combiner.
1
2
1 Diffuser
2 Combiner
2 Adjust the combiner angle so that the
whole diffuser can be reflected on the
combiner.
1
1 Adjust the combiner so that the diffuser
can be displayed in the centre of the
combiner.
When getting in and out of
the vehicle
Be careful not to bang your head on the unit.
Correct combiner position
Before use, be sure to check that the lower end
of the combiner is above your line of sight when
you sit in the seat and look straight forward in
the actual driving position. If the lower end of
the combiner is below your line of sight, do not
use the unit. Fold the combiner into the storage
position to ensure field of vision for driving.
Adjusting the display
brightness
The dimmer function on this unit adjusts the
display brightness automatically according to
the amount of ambient light.
The display brightness can be adjusted man-
ually using the
/ button.
CAUTION
Before using the unit at nighttime or in a dark
place such as in a tunnel, adjust the brightness
of the unit properly so that it will not interfere
with driving. Failure to do so may cause an acci-
dent.
Before driving
20
Section
Before driving
Engb
13
<CRD4765-A>20