Pioneer AVD-W6200 - Manual (Page 12)

11
Basic Operation
Volume Adjustment
Adjust the volume of audio output from the built-in speaker.
• Raise or lower the speaker volume.
The volume of the built-in speaker can be adjusted in a range of 0 to 30. (The volume level
will be displayed for about 4 seconds.)
Selecting a Source
• Select the desired source.
Each press of the SOURCE button selects the desired source in the following order:
[VIDEO1]
= [VIDEO2] = Exit to [VIDEO1]
Note:
• [VIDEO1] and [VIDEO2] are audio and video from the AV equipment connected to the VIDEO1
or VIDEO2 input terminal. (Refer to page 21.)
• Verify the correct connection with the AV equipment connected to VIDEO1 or VIDEO2.
VOL 12
PAL