Pioneer ANH-P9R - Manual (Page 14)

#
(1
*
/,6+
1DYLJDWLRQ
(QWHULQJ GHVWLQDWLRQ
Select “DESTINATION” in the main navigation menu using the rotary stick and press
to confirm.
Tryrp‡vtÇurÃp‚ˆ‡ ’
I‚‡r
‡ We recommend the selection of a stopover (page 19) at the halfway point to the destination.
@‡r vtÇurÃqr†‡vh‡v‚
If your destination lies in another location, select the location using the rotary stick and
press to confirm.
Using the multifunction button the last confirmed letter is deleted.
The complete entry is deleted if the multifunction button is pressed for more
than 2 seconds.
If your destination lies in another
country, select the country (ex.
“GERMANY”) using the rotary stick and
press to confirm.
Select the country using the rotary stick
and press the
I6WDPF button to
confirm.
The last location entered is displayed.
If you want to enter a destination in the
displayed location, you can select
“ROAD” (refer to page 15) or “CENTRE”
(refer to page 15) immediately.
Select the letters one after the other by
turning the rotary stick and press the
I6WDPF button to confirm. The
enlarged selected letter appears at the
right of the display.
To accept the entry, press and hold the I6WDPF button for more than 2 seconds or
select the small check  and briefly press the I6WDPF button.
If the complete place-name was previously entered or was automatically completed,
the program switches to either place-distinguishing list or to road or centre entry.
If no roads and only the centre can be selected in the location entered, the program
switches directly to route menu.
If an incomplete location entry was confirmed, the place selection list is displayed.
Select by turning the rotary stick and confirm by pressing the I6WDPF button. (See
“General notes” on page 12.)
If the entry is unequivocal, the program switches to road or centre entry. If no roads
and only the centre can be selected in the location entered, the program switches
directly to route menu.
The place-distinguishing list is displayed if the selection is ambiguous.
The program switches to road or centre entry.
If no roads and only the centre can be selected in the location entered, the program
switches directly to route menu.
Letters which are already entered are
displayed inversely. For the purpose of
support, the existing entry is displayed
at the next place-name to be reached.
The unit offers only the possible
remaining letters for selection. If no
other entries are available, the unit
completes the place-name
automatically.
The place nearest to the entry appears
in capital letters in the place selection
list.
The scroll marks indicate that more
places are available for selection in
alphabetical order.
Select the required place using the
rotary stick and press the
I6WDPF
button to confirm.
MAN-ANH-P9R-GB.fm Page 14 Tuesday, June 4, 2002 1:39 PM